Gas Boilers Information

The boiler wants its water to be processed

There are countless products available in the market that you can add to your heating system to ensure that it runs properly, and there are several other products that can do work for you even in standalone mode. Irregardless of which you choose, you should take proper care of your central heating system, only then can it perform efficiently. The Government and environmental agencies repeatedly tell us about the ways to conserve energy like switching off the lights and appliances when not in use, re-adjusting the temperature of the room and washing machine according to the needs, and not leaving any electrical device in the standby mode. By doing all this, you not only cut down on the electricity account, but also protect the environment. What is the best way to get your central heating system to work more economically? With the accumulation of the likes of limescale and gunk in your system will make it less efficient.

If you live in a region where hard water is being supplied, then you should look for water treatment methods to prevent gunk and limescale from damaging your central heating system.

Water treatment refers to several aspects of taking care of your central heating system. gunk extractors, limescale inhibitors, electronic and magnetic lime reducers, anti-freeze compounds and noise reducing agents are some of the extensive water treatment products sold in the market today.

You can either get hard or soft water in UK, depending on the area you live in. If you find a build up of limescale in your kettle and on your shower head you probable live in a hard water area. Any collection of limescale will make your system run less economically and therefore increase your heating bill. Just a small, thin layer of scale in your hot water cylinder can increase your fuel bills by as much as 40%. Limescale is nothing, but calcium deposits in your central heating system. These problems are not seen in areas that get soft water, however in case of any doubt one should always seek advice.

The water treatment options work by changing water’s molecular structure, it changes the way water behaves. One way of modification is to convert a structure completely to another, another is to take out the mischievous component, and yet another way is to prevent the structure from becoming solid, thus leaving its normal process unrealized.

There are chemical test kits which will measure the ph and chloride levels and also the iron and copper levels so that you can measure the probable corrosion potential and rate.

To begin with, you should make certain that your system has been assembled by a qualified individual, for example it’s important to have the simple knowledge that connecting aluminum and copper or brass triggers a corrosive reaction because that’s what happens when different metals are joined. Every gas connection should be carried out by a CORGI, Gas Safe, registered professional.

It is a good idea to plan ahead, if you are having a new system installed, think which water treatment you will require as some can be fitted to your system. If you are revamping the old system, you should rinse out the whole system before adding the water treatment method.

It is worth noting that mains water supplies heating systems, but that any system you use to soften water will not help with any central heating problems that you may be having. You will be able to make lather with detergents and soaps more easily but your heating system will still have problems with efficiency.

You basically need to prevent your system from three things, limescale deposits, biological growth and corrosion.

From the very instant your heating system is in place corrosion can begin. The residue from corrosive action causes clogging of the water flow and reduces uniform heat transfer through the radiators. Gradual pitting can perforate the metal piping, causing the boiler or radiators to rattle.

Limescale is caused by calcium and magnesium which is present in the water hard water areas having far more of these minerals than other parts of the country. Deposits of these minerals leave hard crusts in the system when the water is heated. This can be another cause of the boiler making strange noises.

Biological growth inside the system is another hazard that must be prevented. This is usually introduced into the system through open tanks. It establishes itself in the system and then produces sludge and slime. It can also cover the inside of the pipework resulting in clogs and negatively affecting the operation of the whole system.

You can find a lot of information and advice on how to deal with these problems on the internet and in this site. Please spare some time and go through this or read the other informative articles in this web site. Manufacturers of water treatment products provide detailed data and user references on their websites. This site contains a list of manufacturers, and the products that they produce and sell to help maintain your central heating. You can also find a lot of really useful information and tips through forums as well as speaking to suppliers directly with any specific questions that you may have.

So wish you all the best for your water treatment, make sure you chose the one that is effective and at the same time shrinks your household bills by helping you maintain an efficient gas central heating system.