Gas Boilers Information

Combination gas fired boiler set up Tips

Most contemporary central heating boilers are condensing heating boiler and a combination gas fired boiler is of this form. The advantage of a combination boiler is that it can heat up water when needed and for this reason they are very popular.

They cannot be fitted to all houses and you should have a heating survey finished before you buy one on this type. Setting up a combi heating boiler requires conformity with the latest building rules and your heating surveyor will ensure that you do not infringe the rules. There are several reasons why it is more challenging to install a modern-day condensing heating boiler and replace a conventional gas fired boiler.

Your flue exhaust gases will be less buoyant as they are not as hot as a result they often condense very quickly and form an easily seen plume. You may see surface wetting the regions which are close to the flue exhaust outlet, or cause a nuisance to neighboring property, or even people passing close.

Your existing flue may not be suitable for a modern condensing boiler requirements. To complete the set up you could find that the flue will need to be modified. You cannot share a condensing gas fired boiler flue with any other non-condensing appliance.

An external drain point is called for to facilitate the removal of the condensate which will form within gas fired boiler.

Many of these issues have been faced by other householders and there are simple solution is to defeat them. This is where employing an experienced installer produces a quick payback as they will know of the best solutions. You should remember that these one-off set up costs should be setoff against the annual reduced running costs of the re placement condensing heating boiler.

On the plus side you do have some alternatives for where your new gas fired boiler is installed. A change in the location of the new boiler frequently results from the different installation requirements. If your existing gas fired boiler was an open flue or back gas boiler this will definitely be the case. These are often mounted in an interior position away from an outside wall.

Providing you do not set up the boiler in the primary living room most other rooms are acceptable. Sometimes the kitchen is utilised, sometimes a bedroom and on occasion the attic.

A boiler can be set up in the attic as long as the system is sealed. This will be an acceptable if the attic has a lower-down latch with a attic ladder. sufficient lighting and boarded floors providing access to the boiler location in the attic are also required. These prerequisites are so that maintenance and servicing can be performed by an heating engineer.